E-FLITE 80A Pro Switch-Mode BEC Brushless ESC V2 w/ EC5 – EFLA1080

Description

E-FLITE 80A Pro Switch-Mode BEC Brushless ESC V2 w/ EC5 – EFLA1080

When performance matters in your high-current applications, look no further than the E-flite 80-amp Pro switch-mode ESC. This is a high-quality, efficient sensorless brushless electronic speed control with an integrated switch-mode BEC. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication. It is capable of up to 80 amps continuous current when using 3- to 6-series Li-Po battery packs. You can drive up to 7 analog or 6 digital standard-size servos with the BEC on any recommended input voltage. Featuring an exposed, finned heat sink aluminum case with lightweight plastic end-caps, safe power-arming along with advanced programmable features such as low voltage cutoff, braking, timing, throttle input range and more, the E-flite 80-amp Pro switch-mode ESC is truly a pro series electronic speed control.

Features

• Up to 80 amps continuous current with proper air flow and 100 amps burst current (15 seconds)
• 5V switch-mode BEC capable of 5 amps continuous current with 6 amps max burst on any recommended input voltage
• Drive up to 7 analog or 6 digital standard-size servos with the BEC on any recommended input voltage
• 3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage
• Programmable motor braking
• Safe power-arm mode prevents accidental starts
• Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage
• Programmable throttle input range (1.1ms1.9ms or 1.2ms1.8ms)
• Programmable soft start-up rate – .25 second or 1 second
• Auto motor shut down if signal is lost or there is interference
• Programmable timing5 user-selectable rangesuse with a large variety of brushless motors
• Two operating modesAirplane or Heli
• Pre-wired connectorsE-flite EC5 on battery input and 4.0mm female gold bullets on motor output leads

Specs

Forward -YesBrake -YesTime Delay Brake -YesContinuous Maximum Current -80AInput Connector Types -EC5, 10AWGOutput Connector Types -4mm gold bullet, 12AWGMomentary Peak Current -100A (15 seconds) Proper Cooling RequiredLength -3.0 in (77mm)Width -1.6 in (41mm)Height -0.62 in (15.5mm)Weight -3.75 oz (106 g)BEC Voltage -5.5 Volt switch-modeOverload Protection -YesWire Gauge -10 awg input leads; 12 awg output leadsCells w/BEC -9- to 18-cell Ni-MH, 36S Li-PoAuto Cutoff -Yes